How To Clone SIM Card

How To Clone SIM Card



Things Required :


Blank Programmable SIM Card: I got this one from Amazon, you can also buy one on eBay

A SIM Firmware Reader/Writer: I also got this on Amazon, but it’s available on eBay also. (Or For an Indian sim you can get it from his Authorised store.


 Download and install: MagicSIM


Download and install: USB SIM Card Reader

Access to the victim’s SIM for about 15 to 20 minutes.


Let’s get started cloning SIM card


Step 1: Remove the SIM from the phone, place it in the card reader, click read from the card in magic SIM.

When it displays ‘Connected’, select crack SIM in the toolbar.

Step 2: Click strong KI and select all of the other find options and then click start.

Once your KI is found and the crack is finished, click the file, save as and save your cracked SIM info to a file.

Step 3: You must click disconnect from the file menu or you will ruin your SIM card. [Important, Otherwise SIM will crack]

Step 4: Once it says disconnected. Remove the SIM. Put the SIM in your phone and see if it still works, it should.

(If not, either you did not unlock your SIM, or you tried to copy it instead of crack and save.)

Unlock SIM Card

Go to phone tools, select SIM card, then select unlock SIM, it will prompt for a code.

Call network provider, they will ask for your phone number, your account info, name, and security code, then they will ask why you want to unlock your SIM card, just tell them you need to unlock your SIM to get it to work with your overseas  phone or something.

Once they give you the SIM unlock code, enter it, and it will say SIM unlocked.

Step 5: Insert blank SIM card and open USB SIM Card Reader Software not magic SIM at this point.

Step 6: Click connect. It should say ‘No Info Found’ if it is truly blank.

Step 7: Select write to SIM, it will prompt you to select a .dat file, select the one you saved earlier.

Step 8: Now click start, it will take about 10 minutes to write it, once it is complete, it will ask for a security code, enter the security code the network provider gave you, then click Finish.